What’s your risk? I have a plan.
It’s the beginning of the July 4th weekend, a time when I would have, in a previous life, been fully focused on being out on the water. However things are different now that I am retired and spend more time “on the hard” during the summer and much of my time afloat in the winter months.
In spite of it being over four years since I retired, I still have to remind myself that “long weekends” aren’t the best time to be out sailing as just about everybody else is doing just that. What a treat it is to be able to choose when to go based on wind, tide and weather.
Of course, all of this is tempered by Brenda’s “new reality” now that she has had melanoma. This combined with the fact that once you’ve had it you have a higher chance of getting it again gives one pause for thought. I don’t blame her for being timid about spending time in the sun given the danger of recurrence and the lingering pain of the surgery. I doubt that being able to show off her nearly 12 inches of “battle scars” is reward enough for what she’s been through.
A major problem with spending time on the water is increased sun exposure, mainly UVA and UVB rays which are strongest between 10:00 and 16:00 along with the reflected light from the water. In spite of my best efforts, I have been unable to find anyone to quantify the risk except to say that “you have to limit exposure”. Yes, of course I get that, but what does that mean? Live in a cave? Take up mushroom farming or, as it’s known in the trade, Fungiculture.
Brenda’s surgeon feels that she has to be careful with sun exposure but also says that she might “not want to live in a cave”. It’s a complicated issue and I can certainly understand her concern.
Anyway, I got to thinking about how to define “risk” and UV exposure in general. As they say, “you can find anything on the Internet” so I started looking and found a scientific instrument that measures, yes, you guessed it, UVA and UVB light. It’s a pretty neat gadget with a sensor that you point toward a light source and it will give you a very accurate measurement of these portions of the light spectrum. There are a number of companies that make these devices and I settled on one made by General Instruments. It cost less than $175 including shipping. As a point of notice, the reading on the screen in this photo was in shade on our back deck. In the sun a few feet away the reading was a whopping 8,500. Still, I was surprised at the reading of nearly 900 in full shade. I guess that’s reflected light. Of course, inside the house the reading was “0”.
The unit is very easy to use and appears to be quite sensitive. The sensor itself is attached to a cable so you can place it wherever you wish to take a reading. Here’s what the company says about it’s use…
“The #UV513AB UVA/B light meter is ideal for applications including UV curing and sterilization, semiconductor fabrication, offset printing, environmental monitoring and industrial process control. – See more at this link:”
So, I decided to do a test to see what sort of “protection” a good quality sunscreen provided. First, I exposed the instrument to direct sun and got a reading of 8,200 in very bright sun at 10:30. Yes, really, really bright. Next, I placed a thin sheet of plastic sandwich wrap over the sensor and the reading dropped by about 12% to 7,200. Makes sense. Then I applied a thin smear of a good quality sunscreen, Neutrogena 45, on a piece of plastic wrap, let it dry and put that over the sensor. I was shocked to see the reading drop to 100, a reduction of nearly 99%, almost as low as being inside actually. Really Amazing. Brenda and I have always debated the relative value of different types of sunscreen and what you get by spending more. Now we can place some bets and see who is right. That should be fun.
So, my next step will be to see what sorts of readings I get aboard Pandora under the bimini and hard dodger and how much feflected UV there is off of the water. It will also be interesting to see what sort of UV gets through “sun-protective” clothing.
Well, there’s lots to consider however if I don’t get going on the bathroom remodeling today there will be Hell to pay and I’ll never make it to Maine this summer for cruise with some friends which I hope to do in late July.
And speaking of the renovation. I demoed the shower yesterday and rerouted some plumbing. Here’s a “before” shot of the shower. Lovely. And, behind the door it was a horrible taupe colored fiberglass enclosure. You know the type right?
Here’s what it looked like after I was “done”. Wasn’t that easy?
Today, I’ll finish rerouting some plumbing that is in the way and frame up for the pan and shower seat. Of course, a girl has to have a seat to perch on when she shaves her legs. “Too much information Bob, stick to reno details!”.
Oh yeah, speaking of Cuba, which I wasn’t, Brenda and I have a few dates to talk about our trip including one at “Cruiser’s University” being put on at the Annapolis Sailboat Show. That will be fun.
We will also be speaking at a special dinner to be held “under the stars” at the CT River Museum in August. That should be a very special evening with a Cuban theme. They even plan on serving mojtos. I love mojitos! I plan to donate a very special bottle of 11 year old Santiago de Cuba rum to be auctioned off that evening. That particular brand is the only brand in Cuba that is made in it’s own distillery. It is very fine rum and you just can’t obtain it here in the U.S.
Oh yeah, one more thing. Remember my dead lawn mower? And you know how much I love to mow the lawn. Well I was able to find a used commercial 48″ wide Bob-Cat mower. Now I can “love” cutting it for a lot less time each week. Well, that’s the theory at least. So far, not so fast as it’s a “beast” of a machine. So far, mowing with this is more like “the dog walking me”.
Yes I have a plan. A plan to head to Maine. That seems pretty likely. And a plan to measure UV. What Brenda and I will be able to do with that information is anyone’s guess.
And, I am POSITIVE that I have a plan to finish the bathroom renovation. Yes, that’s PLAN ONE for now.
I guess I have covered enough random stuff for one day. The shower stall awaits. Time to get to work. Good news… No UVA or UVB risk there.
Don’t believe me? I have a nifty meter to prove it. So there!!!
Who knew?



With plenty of overflow to the forward deck.
Over the three day event we had a great lineup of speakers including Chris Parker who did several sessions on weather, a topic that can be very confusing. Happily, Chris is very good at making complex issues understandable. Here he is at the CT River Museum, where we held the last day of the event, standing in front of a reproduction of the
It was a thrill to have Chris do his morning and evening broadcasts from my home office. Somehow he was able to manipulate his antennas at his studio in FL via the Internet as well as broadcast over the SSB. How he do that?
Jake from
Tom Whidden gave our keynote presentation at dinner on Sunday. He did a wonderful job presenting a mix of high tech racing, including the current Cup competition and shared some thoughts about what’s going on in contemporary cruising boat design.
Tom has a remarkable background as a
There was much more including a talk by George Day from
Here’s Luna on the dock at Essex Yacht Club for a much needed scrubbing down. Perhaps not quite as scenic a spot or perhaps it’s just the angle of the shot. Essex is beautiful, for sure.
Lars and I headed up by car to Mystic Seaport for the Wooden Boat Show yesterday. I always enjoy seeing all of the beautiful boats and hardware on display from the vendors.
This was a neat find, a Cape Cod Catboat named Pandora. A bit smaller than our Pandora but beautiful. I am happy that our Pandora doesn’t have any exterior teak with the exception of a teak cockpit table.
How about a cold molded camper? Quirky but well made. It even has roof racks
It comes complete with a galley. Sure hope that it’s always sunny when they are working “in the kitchen” as it’s outside. Love the paper towel dispenser.
Everywhere you turn, beautiful boats. How about this drake tail stern? Lovely.
And this beauty built by
And, magnificent details on boats everywhere you look. I loved this steering station. Terrific bright red cast wheel.
Lars and I had a fun day at the seaport. He left today to head east. It was nice to see him again. Hope it’s not too long until our paths cross again. Perhaps Brenda and I will visit Oslow Norway (by plane for sure) where his “home port” is, even though he hasn’t been there in many years.
And all of this just scratches the surface of all that happened in the last week, and the “onslaught” began only one week after Brenda “went under the knife”. No wonder she’s exhausted from all the “fun”.
I was careful to fabricate substantial fiddles on each shelf to keep everything in place. I also wanted to be sure that the design of the woodwork matched the other fiddles elsewhere exactly. I was happy with the results. This is the same space. I challenge anyone to tell that it wasn’t original to the boat. Notice the granite insert on the top of the stove/oven. It was stored in the “old” hanging locker so I had to find another spot to put it when the stove was in use.
How about keeping the stove top insert on top of the washer/dryer? I fabricated a fiddle and attached it with a double sided adhesive foam strip. I think that it looks good and the insert slips in right behind it. I also put a short 3/4″ tall strip on the back end of the washer to keep things from sliding outboard when we are on a starboard tack. Cutting boards will also be stored there, another item that we find hard to store, out of sight. Problem solved.
The addition of shelving to the locker has freed up the area to the right of the stove for other items. This area used to be filled to overflowing and was a source of constant frustration to Brenda.
Now things are more thoughtfully stored and easily accessed. These changes will also make room for a larger food processor that will help Brenda be more efficient in the galley, a good thing to be sure. Besides, when I am putting away things first thing when Brenda’s still catching her “beauty Zs” I won’t disturb her with pots clanging into an overflowing locker. Perhaps that’s the big payoff.
Hey wait, Pandora looks a bit like her. Right?
Well Pandora looks like at a minuscule 47′ version if you squint your eyes really, really tight. Perhaps Pandora could be a tender to P2, a really little one. Here’s an idea. As Ed still owns Marie, his 180′ ketch, he can use her as a tender, or perhaps a better description would to call her a “hotel”, when Ed is out on P2, doing her stuff, tearing up the racing circuit.