>Back, finally and lots going on with Pandora

>I haven’t posted since December, first because I was so busy with the holidays, and second because I couldn’t get into the site.  Frankly, I often not sure what to writer about when Pandora’s not in the water.   Then I had password problems with the site.  I had difficulty with my password in early January there wasn’t anywhere to turn to solve the problem.  When I set this blog up 4 years ago I was using a different e-mail address which I don’t have access to anymore.  Well, tonight I was reading a friends blog (more about that later) and I decided to try and log on again.  After a few tries, I stumbled on the correct password.  I really don’t know why it didn’t work before as I thought I tried it.  However, clearly I didn’t.

Well, I’m back and I am becoming very excited about this coming sailing season aboard Pandora. For those of you who have read past posts, you are aware that I started a new business with a partner just over a year ago.  My goal was to continue to work but to be able to do so with less focus on “being in the office”.  With all the communications gear available these days, why not work aboard?

I am happy to say that things are going very well now and we are very busy.  While I fully expected year one to be really tough, and I wasn’t disappointed on that point, things have really picked up now and we are very busy.

That’s the good news.  The bad news is that it’s going to be a busy summer but at least I can continue to work aboard Pandora where I have set up an office complete with a cell booster, internet access and even a printer.

For this summer, the plan is to launch a few weeks before Memorial Day and head to Mystic CT where we have access to a mooring.  Our cruising plans through the end of June include eastern Long Island Sound, Block Island and the waters around Newport RI.    After that we will head up to Maine where we will be sailing through Labor Day.  There will probably be a few trips home to see clients, but it will mostly be a waterborne summer.  The big challenge for me will be keep up with the demands of work while being on the water.  Plenty of distractions from both, I am sure.

It’s been a busy winter or work on Pandora.  In spite of the really cold and snowy weather, I have been aboard Pandora for a day or two most weeks working on one project or another.

Here’s what I have been up to.

First.  I built a new spice rack behind the fridge.  I went to great pains to be sure that the cabinetry was exactly like what SAGA built elsewhere aboard which definitely slowed things down.  However, I am very pleased with how things came out.  This photo gives a good feel for how it’s situated.

I also purchased a new refrigeration system to augment the one that came with Pandora from the factory.  While the original unit was great for keeping food cool, it wasn’t really set up for sub-zero freezing.   This required the addition of a freezer box within the fridge compartment and a really powerful DC driven cold plate.   The system that came with the boat had three evaporator plates secured in an aluminum box (like you would expect to see in an old style small refrigerator).  In order to make the system work better for my new arrangement, I separated the plates from the box and secured them to the sides of the box.  This set up is a much more efficient use of space and will actually allow me to put more items in the fridge.  This means that we have one system for the fridge and another for the freezer compartment.

All and all, this is a much better arrangement.  You can see that the panels don’t take up much room at all.  Notice that they are secured in the top of the compartment so that they won’t come in contact with food which would cause freezer damage to delicate produce.  There’s a full foot of space below what you can see.  The good news is that SAGA put in 4 inches of insulation so I won’t be cooling the entire world when I crank this baby up.  However, this setup is still the biggest energy hog on the boat, by far.

This shot shows the new freezer compartment, made of one inch of foam insulation sandwiched between two sheets of white plexiglass.  It’s just outboard from the fridge shown above.

You my be asking yourself how much power this will consume but fortunately, my solar panels put out loads of power so I expect to be able to turn things on when Pandora goes into the water and keep everything frozen all summer.  This is particularly notable given the fact that she’s always on a mooring or on the hook.  No shore power for Pandora, that’s for sure.

You can see here that the solar panels are indeed big.  At peak output I have seen 35amps.  Each panel is rated for 135 watts.  That’s 540 watts and no, I don’t understand the conversion from watts to AH into the batteries.   BTW, I have over 700AH of gel batteries so I have loads of capacity.  With the panels, I generally get over 100AH per day in northern climes which is plenty to run all the equipment on board.

We also purchased a hard bottom inflatable dink which will be somewhat heavier than our current tender so we had to have a more substantial davit system.  With this in mind, I have ordered a new radar arch/davit setup which will look like the one on Firecracker, sistership to Pandora.  You can see here that this is a much better system and one that I can operate from my electric cockpit winch when I want to put the tender into the water or pull it up.

You can see Pandora on the right and the other system on Firecracker.  The davit setup is very different and  I am very excited about this upgrade.

As they say “but wait, there’s more” as I am also making new holding tanks to replace the crummy aluminum ones that came with the boat.  I have never done fiberglass layup on a “large”, for me, project before but with good guidance I am very excited about this.  The tanks will be formed inside of melamine coated molds from 5 layers of 5oz fiberglass mat with vinylester resin coated, inside and out with two coats of gelcoat.  I am a bit anxious about the project and intend to tackle it this weekend.  Here’s one of the custom molds that I made.

Finally, I also needed a place to store cell phone, hand held VHF and my air horn so I built this nifty holder to go inside the companionway.  We will see if it gets in the way.  Time will tell on that one.

There are other projects but I will cover them later.

2 responses to “>Back, finally and lots going on with Pandora

  1. >Hey, great job of documenting your winter projects!

  2. >Lots of good improvements. Hey, how about posting on the Saga winter land-rendezvous?
    Roger

Leave a Reply

Your email address will not be published. Required fields are marked *